1. Sssst, ada Administrator baru di forum Indowebster lho... cek di sini
  2. Silahkan Login atau Register, untuk melihat konten-konten menarik lainnya.
  3. Hai IDWS Mania, membership gatotkaca telah hadir kembali lho, kalau mau info lebih lanjut klik di sini
    Dismiss Notice
  4. Indowebster membuka kesempatan bagi kamu-kamu yang berminat untuk melamar menjadi moderator Zona Movies and TV Series. Open Recruitment Moderator Zona MTV (SF Movies, TV Shows, Profile, Fansubs & Encoders, Movie Maker)
    Dismiss Notice
  5. Tertantang untuk menjadi bagian dari staff forum? Indowebster Corner membuka kesempatan bagi kamu-kamu yang berminat untuk melamar menjadi moderator. Open Recruitment Moderator Indowebster Corner
    Dismiss Notice
  6. Mau bergabung dan mengembangkan forum Female Insight Indowebster? Daftar diri kamu menjadi moderator Female Insight! Informasi lebih lengkap, buka link ini
    Dismiss Notice

Perform a RESET of your PDA/pdaPHONE

Discussion in 'Free Talk Zone' started by Nawainruk, Oct 17, 2009.

Thread Status:
Not open for further replies.
  1. Offline

    Nawainruk Lurking Around Most Valuable Users

    Joined:
    Jun 3, 2007
    Messages:
    1,042
    Trophy Points:
    212
    Ratings:
    +98,135 / -0
    Soft Reset

    A soft reset tells to your device to stop what it is doing and to restart.
    All records and programs stored in device will be retained after a soft reset.
    After resetting, the usual start screen will appear.
    Use a soft reset when your device seems to have crashed or hanged.
    This type of reset is the first to try, before any others, to solve the above problems.
    This kind of reset is, usually, well known by the user and really easy to perform.

    Find the reset button on the handheld device.
    It is located in a hole on the back of the device.
    Get your stylus or the reset tool located in your stylus,
    or any other object with a small end (a paperclip if any).
    and push with it into the reset button inside the hole.

    Exception: Hp h19xx - Dell AXIM the reset button is on the left-hand side
    of the unit and this happens now for many pda/phone also
    . For h1940 there is a reset nib in the stylus that can be
    found by unscrewing its top.
    Hp 36xx/37xx series can perform an hard reset if you press
    the reset button for more than 3 seconds. Reset button is at
    bottom right of the device
    Quite unusual for HTC Touch HD the position of the Soft reset
    button that is under the battery cove between the Sim and the
    Card slotsr


    Hard Reset (or Full Reset)

    Performing a hard reset, all settings, records and programs stored in the Pda
    (except the ones stored in Rom) will be erased.
    After a Hard Reset formats, preferences, and other settings will be restored
    to the factory default settings.
    You can restore any previous data if you got a Backup of your device before
    the hard reset otherwise you will need to reinstall any third-party applications.
    If you are hard resetting your device owing to some hard problem i suggest
    to restores installed applications without using the backup if you are not sure
    that backup data do not include the problem you wish to solve also.
    In few words a hard reset allows you to start everything over from scratch.

    WARNING: for WM 5.0 users (wrongly called also as WM 2005)
    The new operative system Windows Mobile 5.0 totally modified the use and the construction of the
    internal memory of the PDA. For all the models that use this new O.S. the Ram is used only as the
    operative memory while the users' programs before loaded into the same kind of memory are now
    stored in Rom (or FRom, FlashRom etc) that is working now as an HD and is no longer subject to
    the lost of data following a full discharge of battery.
    What said above causes a possible different execution of the usual HardReset operation.
    We can note that, while the soft reset is still unchanged, for the classic Hard Reset, that resumes
    the original default setting, has been added new processes with different name and result quite
    different from the hard reset as usually known.
    We may say something like the Warm reset of Palm already used.
    So for any new pda will be added the new procedure if any (the one that is different from the
    classic Hard Reset ) and it will be shown by a different colour.

    ATTENTION: The soft reset requires only to push a button and the only
    difference is the place where this button is located.
    It is not so easy to perform an Hard Reset as, in many cases
    each group of devices has its own procedure and buttons
    locations.
    To try to make it easy the instructions are shown quoting the relative devices:


    AUDIOVOX /-
    1032C Maestro
    Press the power button while pressing and holding the reset switch with the stylus, and then release the power
    button. When a screen appears, release the reset switch. When initialization is completed, the Welcome screen
    appears. Set up the system as in the case of startup process.

    ACER /-
    n10/n20/n30
    for the soft reset note that these model have the button in different places (at the bottom, rear or side).
    To perform an hard reset you need instead to to toggle the reset switch to the left and back to the right.
    The reset switch is usually at the bottom of the devices except for n20 model for which you have to remove battery
    as the reset switch is located in the right side of the battery bay.
    n50
    For this model to perform a soft reset use the tip of the stylus to press the reset button inside the hole on the left
    side of the unit. To perform an hard reset, while holding the Today and Messaging buttons, press the reset button
    inside the hole as detailed above.
    n300
    While holding pressed the Messaging and Today buttons in front of the device, press the reset button into the hole
    at the bottom of the handheld.

    ASUS /-
    MyPAL 620
    Press and hold at the same time the button 3 (Contact) and the stylus in the "Reset" button located on the right
    of MyPal to access to "BIOS" . Using the stylus press the button "Reset" and all is done.
    It appears that there is another way to perform an Hard Reset on this device. Push and hold power button and
    press the reset button and all is done.
    a716
    This device has in the space under the battery a little switch that you can move to disable the Backup battery.
    As to reach the switch you removed the main battery, this action performs an Hard Reset.
    (this is another way along with the mutiple buttons to avoid accidental hard resets)
    a730
    You can use the second procedure mentioned above for the a620, I.E.
    To press the power button and at the same time the soft reset button using the stylus.
    a632/a636
    To perform an Hard reset press and hold the power button while you press the tip of your stylus on the reset
    switch at the bottom. This will cancell all data that unit is elaborating reinstating the device to the default setting
    of the watch.
    To perform a Clean Boot (that really coorrespond to a true Hard Reset), press the Speaker (-) button and at the
    same time the button Change Modality and also the stylus on the reset button. This will reinstate the device to the
    original default setting.
    a626/a686/a696
    To perform a clean reset, press the launch button simultaneously pressing the stylus on the reset button. Then
    when a warning message appears follow the instructions and press to do clean reset, or press to leave the
    operation screen. Performing a clean reset will delete all data.
    Mars II/(O2 xda Zinc)
    To perform a hard reset, use the stylus to reach the reset button found besides the device's camera button.
    Keep the stylus on the reset button and press the Up Navigation button at the same time.
    P535 - P735 - P750
    To restore default settings tap Start > Settings > System tab > Default Settings.
    Input ‘1234’ in password field and tap Ok confirm that you want to restore the default settings.
    You can also perform the hard reset by pressing the UP button of the navigation key and the reset button at
    the same time.
    P526 - P527 - P550
    To restore default settings tap Start > Settings > System tab > Default Settings.
    Input 1234 in password field and tap Ok confirm that you want to restore the default settings.
    You can also perform the hard reset by pressing the UP button of the navigation key and the power button at
    the same time.
    P320
    To restore default settings (i.e perform a Hard reset) tap Start>Settings> System (Tab)> Default Settings
    Thence insert password (1234 by default) to confirm hard reset and tap OK
    NOTE: No hard reset procedure using buttons appears to be available in the manual

    BENQ /-
    P50
    Press and hold power button. At the same time use the stylus to press the recessed Reset button.
    When the screen has faded off release both buttons and when the power indicator light up green press the power
    button to restart the unit.

    CASIO /-
    E-115/125 & EM-500
    The procedure is less authomatized than the others. Remove the CompactFlash card and power on the unit.
    Holding down the power button, use the stylus to press the reset button for about 2 seconds.
    You will see shown on the screen: "Proceeding with this operation initializes memory. Press (Action) to proceed
    or (Start) to cancel". Press the (Action) option to perform the Reset.

    CLIE Sony /-
    Connect the CLIE handheld using the AC adapter and take out the stylus pin by twisting the upper part of the stylus.
    Push down and hold the power button of the unit and use the stylus to slowly press and release the reset button on
    the back.
    When the Palm screen will appear release the power button. At the "Erase all data?" prompt, push the upper part of
    the scroll button on the front of the device to confirm OK. The Sony pda is now resetted and you have only to follow
    the SetUp steps as prompted.

    COMPAQ /-
    Aero 15xx Series
    Remove both the main and backup battery, wait at least 1 minute, then replace the batteries.
    (Backup Battery on the left side)
    iPaq 3600, 3700 Series 36xx bottom
    Press the recessed soft reset button in the hole on the bottom right for more than 3 seconds to perform a hard reset.
    You can also perform a hard reset opening the door on the bottom left of the device and moving the switch behind
    the door to obtain the same result
    iPAQ H3800/H3900/5450/5500
    To perform a hard reset first remove the expansion packs if any, thence turn the device on (not connected to AC
    power) and press
    and hold two outside buttons ( 1 Calendar and 4 iPAQ Task ), also insert stylus into
    the reset button at bottom of iPAQ and pressing and holding this for 5 secs. Release the above buttons in any
    sequence. To reactivate iPAQ, insert stylus into soft reset button or simply connect iPaq to AC adapter.

    DELL /-
    Axim x5/ X3i
    Another procedure a little more involved than the others.Press and hold the Power Button thence, using the stylus
    press and hold the reset button on the left side of the unit until the message "To clear all data press the Contacts
    button" is shown.
    Press the required button located to the left of the directional pad. When you see the message "Tap the screen to
    set up your Pocket PC" execute the requested action and follow the instructions on screen to set up your PDA again
    Axim X30 / X50
    To perform an hard reset press and hold the Power button and at the same time the Reset button by the stylus
    for about 2 seconds. Follow the instructions shown.
    Axim X51
    To perform an hard reset press and hold the Power button and at the same time the Reset button by the stylus
    Release the 2 buttons and you will see on the screen the instructions To clear all data in the memory
    Press Contacts button to complete the hard reset. Otherwise press Mail button to cancel the operation.

    ETEN /-(glofiish)
    m500
    Press and hold the power button and at the same time press, using the stylus, the Reset button on the device's side.
    M600 - G500
    Press and hold the power button and at the same time press,using the stylus, the Reset button on the device's side.
    Release both buttons at the same time and reply YES to the questions to cancel registry and to reinstall default
    settings.
    X500
    Hold the “Power Button” and press the “Reset Button” with the stylus, and release both buttons simultaneously.
    Next, hold the End Button until the system inquiry screen is displayed, then release the End Button and answer the
    question(s).
    M700
    Hold the Power button and press the Reset button using the stylus. Release both buttons at the same time and
    next press the 'End Button' until the inquiry screen appears. Reply to the question.
    x500+
    If the touch screen is functional then tap Programs> Utilities and than Default Setting.
    Otherwise Hold the “Power Button” and press the “Reset Button” with the stylus, and release both buttons
    simultaneously. Next, hold the End Button until the system inquiry screen is displayed, then release the End Button
    and answer the question(s) to perform a clean boot (Hard Reset).
    x800, M800, x600, x650
    To perform a Clean Boot(Hard Reset) hold the “Power Button” and press once on the “Reset Button” with the
    tip of the stylus, and release both buttons simultaneously. Next, continually hold the End Button until the
    system inquiry screen is displayed, then release the End Button. Answer the question(s).
    Otherwise, if the Touch screen is currently working then select Programs> Utlities> Default Settings

    FUJITSU-SIEMENS /-
    Loox 400 series
    Simultaneously press reset button at the bottom using stylus cap and the Suspend/Resume button on top front
    of the unit. After about 10 seconds a pictures will appear on th screen and a tone sounds
    Loox 720 - 710
    Use the point into the unscrewed stylus cap to press the soft reset button at the bottom and at the same time
    press the button suspend/resume in front right corner. After about 10 seconds, when you will see a new screen
    image and you will hear an advice sound, follows the relative instruction.
    Loox n500/520
    Take the stylus and screw it apart.
    Press the tip into the soft reset opening and at the same time the suspend/resume and calendar buttons
    Hold the suspend/resume and the calendar button pressed for a few seconds. The reset can take a few minutes.
    A signal is sounded after the reset is complete. Follow the instructions
    T830/T810
    Slide off the battery cover and quickly remove an then refit main battery. Wait few seconds and athe same time
    press the End button and the Reset button using the stylus tip. The screen will show some options.
    Select SKIP to perform a normal cold start, or Factory Defaults if you confirm to performe an Hard Reset.
    When a signal will sound follow the instructions on the screen

    GARMIN /-
    iQue 3000
    press the reset button on the unit's back. Immediatly after press and hold the Power button until you see the
    Palm Logo. Then release the Power button. You will see on the screen a message advising you are about to erase
    all unit's data. Now you can press the upper half of the scroll button in front of the device to confirm the hard
    reset or any other button to execute a simple reset instead.

    GIGABYTE /-
    g-Smart (i.Bond)
    Press the power button on the top and on the keypad press 7 and 9 (three buttons together)
    It will display "formating" (Hardreset)

    HANDSPRING /-
    Hold down the power button on the front panel of your handheld. Holding down the power button, press the reset
    button by paper clip. As soon as you see the logo on the screen, release the power button.
    Press the up scroll button on the front panel to perform a hard reset or press any other button to perform a soft
    reset. You can restore backed up data by performing a HotSync operation.

    HP /-
    Jornada 520, 525, 540, 545, 547, and 548
    Press and hold the soft reset button and press the power button.
    Jornada 564, 565, 567, and 568
    Perform a soft reset using the button on the back of the device, thence remove the main and backup battery for
    some minutes. (The backup battery is locked on the left side of the device)
    iPaq 19xx Series
    These devices can be hard reset by pressing and holding the soft recessed button on the left-hand side of the
    device while you are pressing and holding the power button at the top the unit. Keep buttons pressed for several
    seconds until the screen fades.
    iPaq 22xx Series
    Press and hold Buttons 1 (Calendar) and 4 (iTask) on the front of the device and, at the same time, press the Reset
    button on the back of the Pocket PC using the device's stylus.
    Hold thel buttons until the screen begins to fade (about 3/4 secs). Release the buttons and stylus. If the device
    has been fully reset, it does not power on and you must reactivate its battery connecting the same to the AC power
    or pressng the usual soft reset button with the stylus.

    Note: The iPAQ 19xx & 22xx series have a feature called "iPAQ
    File Store" allowing to store some data and programs in
    the Flash ROM. If you used this option, the hard reset will
    not cancel the data stored therein. Moreover if this area
    become garbled you risk to have to reflash the Rom.
    Do not store date exceeding its storage's space.

    iPaq 41xx Series
    Press and hold the Power button and at the same time press Reset button in the device's back using the stylus.
    Release first the power button , thence the Reset button and you will see the device to reset and to power on
    again with original setting.
    iPaq rz17xx, rx31xx, rx34xx, rx37xx series
    Press and hold the extreme left button (Mobile Media) and the extreme right button (iTasks) at the same time and
    use the stylus to press the reset button at the bottom of the unit. When the screen fades release the two buttons
    and button under the stylus. If the unit does not power on authomatically perform a simple soft reset.
    iPaq hx4700
    Press and hold calendar and iTask buttons in the front area, while, holding down the buttons, press using the stylus
    the reset button on the bottom for about 2 seconds.
    iPaq hx2750
    press and hold button 1 and 4 on the front of the device and at the same time use the stylus to press reset button
    on the bottom of the ipaq.
    iPaq h6300
    Press and hold the Power button for about 3 seconds while at the same time you press by the stylus the reset
    button on the left side of the unit. When the screen blanks release both the buttons and wait that the device
    powers on.
    iPaq rx1950
    To perform a clean reset and return you HP iPAQ to factory settings press and hold the calendar and the iPaq
    Wireless buttons. While holding down the buttons lighttly press the Reset button by the stylus for about 2 seconds.
    When the HP iPAQ screen begins to fade, release the two first buttons and then remove the stylus.
    Plug the device into AC adapter o press Reset button again to restart unit.
    hx2000 series (not h2210)
    Press and hold down Calendar and iTask buttons. While holding down these buttons, use the stylus to press the
    Reset button on the bottom of the iPAQ for about two seconds. When the Pocket PC screen begins to fade, release
    the mentioned two buttons first, and then remove also the stylus from the Reset.
    hw6500 series
    To perform an hard reset hold down the Power button and use the stylus to press the recessed Reset button on
    the bottom for about five seconds. The screen fades and the device resets. Once the device resets and the screen
    comes back on, release the Power button and remove the stylus from the Reset.
    hw69xx series
    To perform an Hard(clean) Reset press and hold the Answer/Send, Power, and End Call buttons. While holding these
    buttons, by the stylus press the Reset button on the bottom of the iPAQ until the device restarts.
    When the HP iPAQ restarts, release all of the buttons, Reset button included.
    rw 68xx series
    To perform an Hard(clean) reset and return your HP iPAQ to factory settings:
    1. Press and hold the Answer/Send, Power, and End Call buttons.
    2. While holding these buttons, use the stylus to lightly press the Reset button on the bottom of the HP iPAQ
    until the device restarts.
    3. When the HP iPAQ restarts, release all of the buttons, and then remove the stylus from the Reset button.
    rx 57xx/59xx
    To perform an Hard Reset(called factory reset) press and hold the Quick Launch and Rotate Screen buttons.
    While holding these buttons, use the stylus to press the Reset button until the device restarts.
    When the HP iPAQ restarts, release all of the buttons, and remove the stylus from the Reset button.
    iPaq 900 Series
    WARNING. The process named HARD reset is not a real hard reset but only a sort of Soft Reset
    HARD RESET
    A hard reset stops all running applications, but does not erase any programs or saved data. A hard reset
    also resets all hardware registers. Be sure to save any unsaved data within a running application before
    To perform a hard reset: Locate the recessed Reset button at the top of your HP iPAQ.
    Use the stylus to lightly press the Reset button.
    Release the Reset button.
    To perform a factory reset (the TRUE HARD RESET)-A factory reset clears all user settings, programs, and data.
    Turn off your HP iPAQ.
    Press the OK button located on the right side of the unit and the Voice Commander
    button located on the left side of the unit.
    Keeping the ok and the Voice Commander buttons pressed, use the stylus to lightly
    press the Reset button then release the Reset button.
    Release the OK and the Voice Commander button when Clean Boot is shown on the screen.
    NOTE: You can also tap Start > Settings > System > Factory Recovery, and then follow the on-screen instructions.
    iPaq 200 and iPaq 100 series
    To perform a hard reset press the Application Key 3, Application Key 2, and the Voice Recorder button at the same
    time and hit the Reset button once.
    Hold the Application Key 3, Application Key 2, and the Voice Recorder button pressed until Clean boot is displayed
    at the bottom of the screen.


    HTC /-
    qTek 2020-9090-S100 e Xda-Mda-O2-iMate etc
    Press and hold the power button and use the stylus to press the soft reset button at the bottom of the unit at
    the same time
    HTC Wizard(qTek 9100 e i-Mate K-Jam, O2.. etc)
    Press and hold the Comm.Manager button along with Voice Command button.
    While pressing the two button on the device, use the stylus to press and hold the reset button on the side.
    HTC Prophet (Qtek S200,Imate JASmin etc)
    Press and hold the CAMERA and COMM MANAGER buttons, and use the stylus to press the RESET button.
    Holds the CAMERA and COMM MANAGER buttons until the following message is displayed: “Press Send to restore
    factory default or press other key to quit".
    HTC TyTN(Hermes,Qtek9600,JasJam etc)
    Always switch off the device before to execute a full reset. The full reset is the Hard Reset of the device an to
    execute it push and hold at same time both the SoftKey left and right on the front of the unit while you use the
    stylus to press the soft reset button at the bottom of the device.
    HTC Universal(qTek 9000 e i-Mate JasJar, Mda Pro..) etc
    Press with the fingers the two keys at the same time and keep them pressed. In addition by the stylus
    press the pin into the RESET opening on the back of the device. Thence pressing 0 button confirm the Hard reset
    or, using 'x', choice to not perform the Hard Reset.
    (be careful to execute an hard reset under WM 5.0 read device's manual before)
    HTC P3300 Artemis - HTC P3600 Trinity - HTC P3350 Love
    Press and hold left and right button - SOFTKEY and using the stylus press the RESET command of the device.
    Release the stylus, but hold the above buttons and release them when the screen shows the following message:
    “Press SEND to restore manufacturer default, or press ..................”
    Now you can press the required button (green call icon)
    HTC P3400 Gene
    To perform a hard reset (Full Reset) press and hold the left SOFT KEY and the right SOFT KEY, and at the same
    time, use the stylus to press the RESET button at the middle left side of your device.
    Release the stylus, but continue pressing the two SOFT KEYs until you see the following message on the screen:
    This operation will delete all your personal data, and reset
    all settings to manufacturer default. Press Send to restore
    manufacturer default, or press other keys to cancel.
    Release now the two SOFT KEYs, and then press the TALK (Send) button
    HTC P4350
    Press and hold the left and right SOFT KEY, and at the same time, press the RESET button by the stylus.
    Release the stylus, but continue pressing the two SOFT KEYs until you see the following message:
    ''This operation will delete all your personal data, and reset all settings to manufacturer default......''
    Release the two SOFT KEYs, and then press the SEND button
    HTC X7500/7501-(ATHENA/ADVANTAGE/Dopod U1000/T.Mobile AMEO)
    Slide the Volume slider down and at the same time, use the stylus to press the RESET button at the back of your
    device. After a brief period of time, two choices will appear on-screen. Press the CENTER OK button to perform the
    hard reset. (Otherwise, if any, press the CAMERA button to exit.)
    HTC S620 Excalibur (T.Mobile Dash, Dopod C720W) - HTC S710 Vox
    click Start > Expert > Cancel memory to performe an Hard Reset and follow the instructions shown on the screen.
    The smartphone will restart immediately after the reset.
    HTC Startrek Qtek 8500 (iMate SmartFlip/Qtek 8500/Star100/Dopod S300/Cingular 3125)
    To reset the smartphone click Start > Accessories > Clear Storage. Follow the on-screen instructions to hard reset
    The phone will restart after the reset.
    HTC Touch Elf
    Press and hold the TALK and END buttons, and at the same time, use the stylus to press the RESET button at the
    bottom of your device. Release the stylus, but continue pressing the above buttons until you see the following
    message on the screen:
    "This operation will delete all your personal data, and reset all settings to manufacturer default.
    Press Action to restore manufacturer default, or press other keys to cancel."
    Release the TALK and END buttons, and then press ENTER on your device.
    Another way of clearing the device storage and reset all settings back to factory default is to use the
    Clear Storage feature. You will lose all your data and files on the device storage when you use it, so
    make sure to do a backup first.
    Tap Start > Settings > System tab > Clear Storage. Enter “1234” then tap Yes.
    HTC TyTN II (Htc Kaiser o P5500) o Vodafone v1615, T.Mobile Vario III,AT&T Tilt
    To perform a hard reset (also known as a full reset) press and hold the left SOFT KEY and the right SOFT KEY,
    and at the same time, use the stylus to press the RESET button at the bottom of your device.
    Release the stylus, but continue pressing the two SOFT KEYs until you see a cancel message on the screen
    A this time release the two SOFT KEYs, and then press the button Send/reply with Green icon on your device.
    Important: If Encrypt files placed on storage cards, backup all files using ActiveSync thence afer the procedure,
    copy your files back to the storage card otherwise you will be unable to access to them.
    If the unit works fine but you need to performe an hard reset yo can use also:
    Tap Start > Settings > System tab > Clear Storage. Enter “1234” then tap Yes.
    HTC Diamond Touch - HTC Touch Pro (Raphael)
    To perform a hard reset, with the device turned on, press and hold the VOLUME DOWN and ENTER buttons.
    Thence press the RESET button with the stylus tip. Release the RESET button, but continue pressing VOLUME DOWN
    and ENTER buttons until you see the warning message on the screen.
    To confirm Release the VOLUME DOWN and ENTER buttons then press VOLUME UP button to restore manufacturer default,
    or press other keys to cancel.
    As usual you can use also the Clean Storage as follows:
    On the Home screen, slide to the Settings tab > tap All Settings > tap Clear Storage and select the option you like to apply.
    Enter "1234" then tap Yes.
    HTC Touch HD
    To perform a hard reset
    With the device turned off, press and hold VOLUME UP and VOLUME DOWN buttons, then briefly press the POWER button.
    Continue pressing the VOLUME UP and VOLUME DOWN buttons until you see the message:
    "his operation will delete all your personal data, and reset all settings
    to the manufacturer default settings. Press VolUp to restore manufacturer
    defaults, or press other keys to cancel."
    At this time Release the VOLUME UP and VOLUME DOWN buttons and press the VOLUME UP button to perform the hard reset.
    As usual you can use also the Clean Storage as follows:
    On the Home screen, slide to the Settings tab > tap All Settings > tap Clear Storage and select the option you like to apply.
    Enter "1234" then tap Yes.
    HTC Touch Cruise 09 (Iolite) - HTC Touch 3G (Jade)
    To perform a hard reset Power off your device.
    Press and hold the VOLUME DOWN and ENTER buttons, and then press the POWER button.
    The following message then appears on the screen:
    "This operation will delete all your personal data,
    and reset all settings to manufacturer default.
    Press VOLUME UP to restore manufacturer default,
    or press other keys to cancel."
    Press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.
    You can also use Clear Storage to hard reset your device.
    On the Home screen, slide to the Settings tab> tap All Settings > On the System tab, tap Clear Storage > Enter “1234” and then tap Yes.
    HTC Touch Viva (Opal)
    To perform a hard reset remove the back cover and with the device turned on, press and hold the TALK/SEND and END buttons, then press
    the RESET button with the stylus tip. Release the RESET button, but continue pressing the TALK/SEND and END buttons until you see this
    message on the screen:
    "This operation will delete all your personal data,
    and reset all settings to manufacturer default.
    Press Send to restore manufacturer default, or
    press other keys to cancel."
    Release the TALK/SEND and END buttons, then press the TALK/SEND button to perform the hard reset, or any other button to cancel the reset.
    You can also use Clear Storage to hard reset your device.
    On the Home screen, slide to the Settings tab> tap All Settings > On the System tab, tap Clear Storage > Enter "1234" and then tap Yes.

    I-MATE /-
    Ultimate 8150, Ultimate 6150
    To perform a hard reset (also named a Cold Boot) by accessing the Master Clear Application:
    Tap Start > Settings > System tab > Factory Setting - enter 1234. Confirm by tapping Yes.
    The system will reboot to complete the operation. Alternatively, perform an hard reset
    simultaneously holding the Power button and push the soft reset button inwards.
    Release the buttons and the device will hard reset.

    MITAC /-
    Mio P350/P550
    You can go back to the factory default executing an hard reset from Start-> Settings-> SysInfo-> Clean Boot
    The display will show two methods:
    Method 1: It will clean all data. Include Mio Map.
    Method 2: It will clean all data, except Mio Map.
    Mio a701
    Make sure that A701 is turned off then press and hold at the same time the Down Volume button and the End button.
    When the unit start to vibrate you can release both buttons. The unit will turn on automatically and it will show the
    Setup Wizard. Follow the instructions to complete the operation
    Mio a201
    Remove the battery cover by pressing and then sliding the cover off.Use the stylus to slide the ON/OFF switch to
    the ON (left) position . (ON to OFF , then OFF to ON) Install the battery and immediately press the Record Button.
    The screen will show "cold boot" and "loading......" At this time, you must replace the battery cover.
    Mio 168
    Close all the running programs. On the rear of the unit slide the battery switch to OFF.
    After about 1 minute return the switch on the ON position. The unit will restart with the original settings.

    MWg /-
    Atom life
    To perform a hard reset be sure that you have backed up all your data in a Mini SD card or on your PC
    before performing a hard reset.
    2. Press and hold the power button, and then use the stylus to press the soft reset button at the same time.

    NEC /-
    MobilePro P300
    Hold the Power and Record buttons down and insert your stylus into the reset hole.

    PALM /-
    To perform a soft reset on a Palm (Handspring also) device find the reset button located in a hole on the back of
    the device. Using the tool in your stylus, or some other object such as a paperclip press reset button inside the hole.
    There is also another form of Reset: Warm Reset
    A warm reset bypasses any system extensions (such as HackMaster hacks, operating system patches, and so on)
    that are loaded on the device. A warm reset often bypass the "boot loop" error, allowing you to remove applications,
    previously installed, causing problems. All stored data in the device remain unchanged with a warm reset.
    To perform a warm reset hold down the top scroll button and press the reset button inside the hole on the back of
    your unit. When in the Palm display you see the general preferences screen, release the top scroll button.
    After a warm reset, you may need to perform a soft reset to get the device working as normal.
    Performing a hard reset you start everything over from scratch. Be sure to back up your files first.
    Perform a hard reset only if a soft or warm reset does not solve your problem.
    To perform a hard reset hold down the power button (Wireless Mode button on the Treo 600) and press the reset
    button on the back panel. When the Palm screen appears, release the power button.
    You will get a message informing that you are about to erase all your data. To continue, press the top scroll button.
    To cancel, press any other button. In this case you will get a soft reset only.
    After a hard reset calibrate the digitizer and verify time & date.

    QUANTA /-
    xda Atom
    Press and hold the power button, and then use the stylus to press the soft reset button at the same time.

    SAMSUNG /-
    sgh i620
    To reset your device press the Start soft key on the screen. Select Settings . More... . Security . More... Reset.
    Enter the reset password and press the Done soft key. (The default password is “1234.”)
    Tap on Yes to confirm the reset, thence press the Yes soft key to confirm deleting DRM files.
    The device resets and reboots itself.
    sgh i600
    You can hard reset your device as follows: . On the screen, press Start.
    Select Settings > More...> Security> More... > Reset. Enter the reset password and press the Done soft key.
    (The default password is “0000.”). Press the Yes soft key to confirm the reset. Press the Yes soft key to
    confirm deleting DRM files. The device resets and reboots itself.
    sgh i320
    On the Home screen, press the Start. Select Settings . More... . Security . More... .Hard reset.
    Enter the initialisation password and press Done. (The default password is “1234.”)
    Press the Yes soft key to confirm. The phone resets and reboots itself.

    TREO palmOne /-
    Treo650
    Remove battery cover and find the Reset hole beside the battery (without removing the battery). Press and Hold
    down the Power/End button and using the stylus press and release the RESET button in the hole.
    Release the Power/End button when the Palm Powered logo appears and when you will be asked if you wish to
    remove all data press the Up button to confirm the Hard Reset.

    TREO /-
    Treo 680
    Remove back panel to expose the battery. Hold the power button down on the unit.
    While holding the power button, remove the battery.Keep holding the power button and place the battery back
    The Palm Treo 680 will reboot and you will see a message asking if you would like to delete all data.
    Release the power button and press UP on the 5-way navigator. You will have to sync Treo to restore data.

    TOSHIBA /-
    Toshiba E310
    Slide the white switch on the bottom left to the left for a few seconds. The manual says depress the power button
    at the top with the stylus in the hole in the back and release the power button.
    Toshiba E740
    Slide the white switch at the bottom of the device to the right for few seconds, thence slide it back.
    Toshiba e800/805
    Use the stylus to move to the right the switch under the rubber cover that you find above the wifi switch on the
    bottom of device. After few seconds reinstate switch to original position.
    Portege C500 (RG4-E01)
    Click Start > Settings > More > Perform Hard Reset then follow the on-screen instructions to reset the phone
    that will restart after it has been reset.
    Portege C900 (RG4-E02) Satellite
    After you tried restarting your Toshiba phone, if it still deadlock or freeze, press the Reset button.
    Even it still deadlock or freeze, remove the battery then re-insert the battery and turn your Toshiba phone on
    and reinstate all settings.
    portegè G910/G920
    to perform a Hard Reset (a master Clear for Toshiba) from Today screen Tap Start>Setting>SystemTab>Master Clear
    Enter code to confirm execution and Tap the Reset button to reinitialise your phone.The phone will restart after the reset
    restored to its default factory settings. All the user data and programs on your Toshiba phone will be formatted.

    UBIQUIO /-
    501
    To perform a hard reset press and hold the Comm Manager button and Voice Command button on the device.
    Keep the two buttons pressed, and at the same time, use the stylus to lightly press and hold the RESET button.
     
Thread Status:
Not open for further replies.

Share This Page

About Forum IDWS

IDWS, dari kami yang terbaik-untuk kamu-kamu (the best from us to you) yang lebih dikenal dengan IDWS adalah sebuah forum komunitas lokal yang berdiri sejak 15 April 2007. Di bangun sebagai sarana mediasi dengan rekan-rekan pengguna IDWS dan memberikan terbaik untuk para penduduk internet Indonesia menyajikan berbagai macam topik diskusi.